Digiop DM Series Manual de usuario

DIGIOP® Control V8.8 User ManualProducts: DH Series, DM Series Hybrid DVRs DI Series, NT Series NVRsPlease read this manual before using your serv

6www.innias.comSECTION 3: Using DIGIOP® ControlSECTION 3 Using DIGIOP® ControlThe DIGIOP® Control interface can be opened either through a web brow

7DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control1. Log into DIGIOP Control with username admin. 2. Click the Account button. 3. En

8www.innias.comSECTION 3: Using DIGIOP® Control3. Open the Update selected drop-down list and choose the type of update you want to apply. 4. Check

9DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® ControlGLOBAL PERMISSIONSGlobal Permissions (see above screen) allows the administrator to d

10www.innias.comSECTION 3: Using DIGIOP® ControlThe System-level permissions for DIGIOP® menu above can be opened by clicking (highlighting) a system

11DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® ControlThe Device-level permissions for DIGIOP® menu above can be opened by clicking (highl

12www.innias.comSECTION 3: Using DIGIOP® Control3.4 DIGIOP VIDEO SERVER - Edit SettingsTo open DIGIOP VIDEO SERVER the settings window, click the Vi

13DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control3.4.1 Congure hDVR capture boardClick the link Congure the <type> capture b

14www.innias.comSECTION 3: Using DIGIOP® Control3.4.3 Spot Monitor TourThe hDVRs capture card can be congured to sequentially display (Tour) analog

15DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control2. In the list under the Video server, click the name of the analog camera you want

iiwww.innias.comSECTION 1: Quick Setup GuideRevision HistoryDate Reason for Change7/18/2011 Initial release. 1/31/2012 Includes new V8.1 features inc

16www.innias.comSECTION 3: Using DIGIOP® Control — Drawing Mode”Draw” enables you to select individual cells in the grid for motion sensing by holdin

17DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control3.6 Add “Discovered” IP cameras to the NVR/hDVRThe DIGIOP® server will automaticall

18www.innias.comSECTION 3: Using DIGIOP® Control5. If the default parameters listed are acceptable, click Save. The camera will be added to the syst

19DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control7. Click the camera you added to highlight it, then click the Edit button. Notice t

20www.innias.comSECTION 3: Using DIGIOP® Control NOTESome cameras include a dual stream option. When selecting this option, setup the secondary strea

21DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control » For the area selected, adjust the Sensitivity (slider) of the area you selected.

22www.innias.comSECTION 3: Using DIGIOP® ControlNew Camera Action LinkIP Cameras Added to These Channels2. In the Camera settings list, select the

23DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control4. Click Save to update the video server with the new IP camera. 5. In the device

24www.innias.comSECTION 3: Using DIGIOP® Control7. Depending on the settings you selected for Motion detection, additional information may need to b

25DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control2. In the settings list at the right, change the items as needed. Refer to “3.4 Add

iiiDIGIOP® Control V8.8 User ManualTable of ContentsTable of ContentsSECTION 1 System Overview ...

26www.innias.comSECTION 3: Using DIGIOP® Control2. In the Group settings window, enter the name of the group in the Name eld. 3. Open the Layout d

27DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control3.9.1 Group PermissionsTo open the group permissions menu:1. Click the Groups link

28www.innias.comSECTION 3: Using DIGIOP® Control2. In the Tour settings window, enter the name of the tour in the Name eld. 3. Add a camera or gro

29DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control3.10.1 Tours PermissionsTo open the Tours permissions menu:1. Click the Tours link

30www.innias.comSECTION 3: Using DIGIOP® Control2. In the Create Item frame, click A New Role. 3. In the Role menu, enter the name of the Role in t

31DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control3.11.1 Set Permissions for RolesAfter a role is created, or if a Role needs to be mo

32www.innias.comSECTION 3: Using DIGIOP® Control2. In the Create Item frame, click A New User. 3. In the User settings window, enter:Name Email add

33DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control5. Click Save to update DIGIOP® Control. 3.13 User ProlesUsers with administrativ

34www.innias.comSECTION 3: Using DIGIOP® ControlThe current DIGIOP ELEMENTS™ V8.8 supports the following Notications Event types: — Not Recording:

35DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control3. Click the New Stream data stream you want to add to the server. A properties win

ivwww.innias.comTable of Contents3.15.3 Data server System Health ...373.15.4 Fraudulent except

36www.innias.comSECTION 3: Using DIGIOP® Control3.15.1 A New RuleDIGIOP® Control allows Admin users to congure a rule. When a rule is violated, the

37DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control3.15.2 Data server Recorder EventsRecorder events display shows the occurrence of I/

38www.innias.comSECTION 3: Using DIGIOP® Control3.16 Recorder EventsRecorder events appear as Digital Inputs in the DIGIOP® Control object tree that

39DIGIOP® Control V8.8 User ManualSECTION 3: Using DIGIOP® Control3. Click (select) the Digital Input with the number of the sensor input that will t

40www.innias.comSECTION 4: Data Server StreamsSECTION 4 Data Server StreamsThe DIGIOP® Data Server includes several preset data steams. Each data s

41DIGIOP® Control V8.8 User ManualSECTION 4: Data Server Streams4.1.3 Conversion RateDIGIOP® automatically associates a counting device and with a ca

42www.innias.comSECTION 4: Data Server StreamsFor information about creating a Rule or and Query, see “SECTION 5 Create a Rule or Query” on page 51.4

43DIGIOP® Control V8.8 User ManualSECTION 4: Data Server StreamsParameter settings: • Name assigned to the data stream• Drawer address and port• Ev

44www.innias.comSECTION 4: Data Server StreamsInnias Intelli-M: Select this option for data stream capture from Innias Intelli-M access control sys

45DIGIOP® Control V8.8 User ManualSECTION 4: Data Server Streams• TCP or Serial – Option to receive data through a TCP/IP or Serial interface. • Lis

1DIGIOP® Control V8.8 User ManualSECTION 1: System OverviewSECTION 1 System OverviewDIGIOP ELEMENTS™ is a ground breaking Video-Enhanced Intelligenc

46www.innias.comSECTION 4: Data Server Streams Parameter settings: • Name – Name assigned to the line capture data. This name will appear as an item

47DIGIOP® Control V8.8 User ManualSECTION 4: Data Server StreamsParameter settings: • Name assigned to the data stream, which appear under the Data S

48www.innias.comSECTION 4: Data Server StreamsMultiline Capture - Enable MultilineWhen Enable Multiline is selected, two options are available: • Be

49DIGIOP® Control V8.8 User ManualSECTION 4: Data Server Streams NOTEYou can use both Enable Filters and Enable Multiline when using this feature. Ph

50www.innias.comSECTION 4: Data Server StreamsVeriFone Cash RegisterSelect this option to receive a data stream from a VeriFone® cash register. This

51DIGIOP® Control V8.8 User ManualSECTION 5: Create a Rule or QuerySECTION 5 Create a Rule or Query5.1 RulesA rule is a condition that, when violat

52www.innias.comSECTION 5: Create a Rule or Query2. Click the New Rule link. 3. In the Name eld, assign a Name to identify the rule. 4. In the Sc

53DIGIOP® Control V8.8 User ManualSECTION 5: Create a Rule or QueryIn the window above, select the options as needed, then click Save. Contact your di

54www.innias.comSECTION 5: Create a Rule or Queryi. Data Summary Forwarder – This action allows you to setup a scheduled task that will forward a su

55DIGIOP® Control V8.8 User ManualSECTION 5: Create a Rule or Query ū Email Provider – Email SMTP server address. NOTE: This eld, and related elds o

2www.innias.comSECTION 1: System OverviewLocal and Hosted-Enterprise ManagementThe DIGIOP ELEMENTS™ server can be managed either locally or managed b

56www.innias.comSECTION 1: Quick Setup Guideiii. Image Forwarder– This action performs an FTP upload of an image when an event is triggered Parame

57DIGIOP® Control V8.8 User ManualSECTION 5: Create a Rule or Queryv. Phidgets Digital Output – The Phidgets Digital Out action enables you to setup

58www.innias.comSECTION 5: Create a Rule or Queryvi. Record Video – This action allows you to specify a recording action triggered by an event or al

59DIGIOP® Control V8.8 User ManualSECTION 5: Create a Rule or Query ū Start Recording- Will record on any event ū Use a property to determine the acti

60www.innias.comSECTION 5: Create a Rule or Queryviii. Send Notication – This action allows you to congure a Rule action to send a notication to

61DIGIOP® Control V8.8 User ManualSECTION 5: Create a Rule or Query5.2 Custom QueryA Query is a test applied to some condition or conditions of some

62www.innias.comSECTION 5: Create a Rule or Query3. In the window shown below, enter a name in the Query Name eld, then open the Primary Device Cat

63DIGIOP® Control V8.8 User ManualSECTION 6: Using ViewerSECTION 6 Using ViewerViewer is a video search and backup utility that resides on the NVR o

64www.innias.comSECTION 6: Using Viewer NOTEBy default, Viewer opens at the end of the current recorded les. No new recording occurs while the Searc

65DIGIOP® Control V8.8 User ManualSECTION 6: Using ViewerItem Name Description11 Scan bar (cursor)Lets you slide a scan bar along the time line and qu

3DIGIOP® Control V8.8 User ManualSECTION 2: Using DIGIOP ELEMENTS™ SoftwareSECTION 2 Using DIGIOP ELEMENTS™ SoftwareDIGIOPELEMENTS™ consists of DIG

66www.innias.comSECTION 6: Using Viewer6. Use the video controls [4] to control the video playback. Be prepared to stop and rewind the video, fast f

67DIGIOP® Control V8.8 User ManualSECTION 6: Using ViewerPrintDragZoomFor future useNo Zoom Maximum Zoom6.2 Search > Tools MenuThe Search option p

68www.innias.comSECTION 6: Using Viewer2. Click on a camera image you want to analyze. The border of the selected camera is highlighted.3. Select t

69DIGIOP® Control V8.8 User ManualSECTION 6: Using ViewerTable 2. Smart Search optionsItem Name Description1 Zoom Only impacts playback. (1) Choose a

70www.innias.comSECTION 6: Using ViewerSquareBlock NOTEMultiple blocks and squares can be added to a single image to create the motion sensitive regi

71DIGIOP® Control V8.8 User ManualSECTION 6: Using Viewer16. Click Search Next Movement again to move to the next search.17. Continue to click Searc

72www.innias.comSECTION 6: Using Viewer3. Select any one or more Image Filter options. The image will be adjusted according to the lters chosen.4.

73DIGIOP® Control V8.8 User ManualAPPENDIX A: Hard Drive CongurationAPPENDIX A Hard Drive Conguration DIGIOP® systems perform specic hard drive p

74www.innias.comAPPENDIX B: Software Upgrade to DIGIOP ELEMENTS™APPENDIX B Software Upgrade to DIGIOP ELEMENTS™DIGIOP® systems with previous softwa

75DIGIOP® Control V8.8 User ManualAPPENDIX C: Adding DIGIOP® LicensesAPPENDIX C Adding DIGIOP® LicensesLicenses are added to the system after system

4www.innias.comSECTION 2: Using DIGIOP ELEMENTS™ Software2.2 Open DIGIOP® Control1. To open DIGIOP® Control: a. From the server desktop: Start the

76www.innias.comAPPENDIX C: Adding DIGIOP® LicensesSelecting Manage Licenses opens the License Summary window. 5. On the License Summary display, cl

77DIGIOP® Control V8.8 User ManualAPPENDIX C: Adding DIGIOP® Licenses7. Follow the on-screen instructions to complete the activation process. This pr

78www.innias.comAPPENDIX D: File Naming ConventionsAPPENDIX D File Naming Conventions NOTEAny drive 4GB or greater in size is considered a storage

79DIGIOP® Control V8.8 User ManualAPPENDIX D: File Naming ConventionsFiles are for 1019 hours (10:19 AM)For the example above: • HOUR = 10 (10 AM))•

80www.innias.comAPPENDIX E: TCP/IP Port Settings Using the FirewallAPPENDIX E TCP/IP Port Settings Using the FirewallIf there is a rewall between

81DIGIOP® Control V8.8 User ManualAPPENDIX F: Warranty InformationAPPENDIX F Warranty InformationWarranty information about your system may be found

82www.innias.comSECTION 1: Quick Setup Guide

5DIGIOP® Control V8.8 User ManualSECTION 2: Using DIGIOP ELEMENTS™ Software