Digiop DI Series Manual de usuario descargar pdf (Pagina 19)

17IH.264 Network Video Encoder

SECTION 2: INSTALLATION AND SETUP

Attach your encoder to the network and power it on

Apply power to the encoder. When the encoder powers on, it performs an internal initialization, then establishes a connection to the

LAN. Wait until the initialization process completes before continuing. It may take up to 3 minutes for your encoder to initialize.

Congure the encoder IP address

1. Open the IPAdminTool directory on your computer, then double click the le IPAdminTool.exe to start the application.

When the IPAdmin Tool starts, it will discover all the IP devices it supports that exist on the network. The discovery process

may take a few minutes.

2. In the Product list, nd the entry with the same MAC address as the encoder you installed. If the encoder is not shown, click

Refresh once a minute to update the list.

3. Right click on the entry for your encoder and select IP Address.

IP Setup window

4. In the IP Setup window:

a. Select the Static option if it is not selected. This option is required if video from the encoder will be recorded by a

network DVR, or if you want to view video from the encoder across a WAN (Internet).

b. Enter the IP address for your encoder from Table 1 into the IP Address eld.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

Sin comentarios

Digiop DI Series Manual de usuario Pagina 19